New Firmware Coming for EOS-1D X Mark II

From the Canon Digital Learning Center:

Based on feedback from large photo organizations, news photojournalists, and so on, Canon has delivered a significant firmware upgrade for the EOS-1D X Mark II camera. Firmware upgrade version 1.1 clearly targets professional users and organizations, but as you’ll see, some of these features may be useful to individual working pros or even serious photography enthusiasts. We’ll examine what’s new in this firmware upgrade in this article.
 
In a nutshell: what’s new and different?
 
This new upgrade (version 1.1) addresses specific issues that professional news and photojournalism organizations have brought to Canon’s attention — we understand that not all of these will be important in more ordinary, everyday use to individual photographers. That said, the changes and new features that this firmware adds to the EOS-1D X Mark II camera are the ability to:
 

  • Install up to 39 items of IPTC information into the camera, and to add data (or deliberately not apply it) to images you take
  • Add set-up information for up to 40 new Wi-Fi networks to a memory card, and load that data as a full set of possible Wi-Fi networks to select from for connection
  • Transfer only “protected” images via Wi-Fi
  • Retain GPS position data: Continue to apply last known GPS location information to images subsequently taken, even if GPS connection is lost (photographer went inside a building, etc.)
  • Change LCD color tone (four pre-defined settings), to either approximate display from other cameras you’re working with, or to shift color tone based on ambient lighting as the LCD monitor is being used

Keep in mind that the EOS-1D X Mark II differs from other Canon EOS models in that it not only permits network communication and transfer of images via Wi-Fi (using the optional WFT-E8A or WFT-E6A wireless file transmitters), but also via wired ethernet connection — there’s a dedicated ethernet port on the camera for this purpose. This allows similar network connectivity, but without some of the variables users can encounter on-location with Wi-Fi transmission. Firmware v. 1.1 doesn’t change this; we only want to remind users of it here.

Read the entire article on the Canon Digital Learning Center.
 
Note: The firmware is not yet availble for download on Canon USA’s website.
 
B&H carries the Canon EOS-1D X Mark II.

Canon and Nikon News, Deals and What’s New at The-Digital-Picture.com

This entry was posted in Photo Equipment and tagged , , , . Bookmark the permalink.

Leave a Reply