Soften Your Light Without Using Modifiers

Light modifiers are great. They can make a small light source appear larger. They can make hard light appear soft. They can even focus light down to a narrow shaft of light. However, when you are shooting outdoors, light modifiers, such as umbrellas, can quickly become cumbersome, as they turn your light stand into a sail when the wind picks up. Unless you have an assistant or two to lend a hand, carrying sandbags to anchor your light(s) is not an easy task. This tutorial will lead you through how to balance a hard light source with the ambient light to soften the appearance of your light. Note that I am not claiming that this is soft light; merely that it appears softer when balanced with the ambient light. If you have the luxury of an assistant to carry or hold all your gear, by all means use your softboxes and umbrellas.

lighting softening hard light without modifiers

Note that the single, barebulb speedlite was moved back several feet from subject and raised to around ten feet.

Your first goal is to make your light spread larger. This is done by backing the light off of your subject several feet. This allows the light spread to cover more of your subject. Because of the inverse square law (which I won’t go into), you will lose a substantial amount of your light output before it reaches your subject. This isn’t exactly a bad thing, however, assuming you aren’t trying to overpower the sun with a single speedlite. Besides increasing the spread of light, from the top to the bottom of the subject, this extra distance also helps even out the light from the front to the back of your subject. In other words, her right arm, which is closer to the light, is lit the same as her left arm, which is further away from the light. If you are using a speedlite, it’s helpful to set the zoom as wide as it will go, such as 24mm. If you are using a studio strobe, such as a Profoto head, pull the zoom reflector all the way back, to allow the widest possible spread. Also, consider raising your light several feet above your subject. This makes the light appear like a more natural occurring light source, such as the sun.

lighting softening hard light without modifiers

Flash at 1/8 power. Camera at ISO 50, F/9, 1/200.

Next, get a reading of your ambient light. As you can see in the first image, the ambient is considerably darker than the strobe light, making it appear very harsh. I brought up the ambient by lowering my shutter speed from 1/200 to 1/80 and opening my aperture up from f/8 to f/5.6. Note that if lowering the shutter speed alone had brought the ambient light to a good level, I wouldn’t have needed to adjust the flash settings. However, since I needed to also open up the aperture several stops, that meant I also needed to lower the output of the speedlite. Since it was a rather gloomy day outside, my already low flash output of 1/8 was lowered even further to 1/16.

lighting softening hard light without modifiers

Flash at 1/16 power. Camera at ISO 50, F/5.6, 1/80

After the ambient light is brought up, you can see that it begins to fill in the hard shadows, making the strobe light appear a little less harsh. The next thing you need to keep in mind is the direction of the subject to the light. Notice that when the subject turns away from the light source, the light creates harsh shadows on her face. By having the subject turn in to the direction of the light (or moving the light to a more frontal location), you eliminate some of the unflattering shadows.

lighting softening hard light without modifiers

If the subject is facing away from the light, this can create harsh shadows.

lighting softening hard light without modifiers

Turning the subject in the direction of the light helps alleviate some of the harsh shadows.

I also recommend using a longer focal length lens, such as a 70-200mm. Having a 2.8 aperture isn’t important either. I have the 70-200 f/4, and I prefer this, not only because it is half the price and lighter in weight, but because I would be shooting around f/4 anyway. The added depth of field from the smaller aperture allows my subject(s) to be sharp, from the tip of their nose to the back of their head. Yet I am still able retain a nice, soft depth of field in the background, due to the lens compression created by shooting at 200mm. This softening of the background further creates the impression of soft light.

lighting softening hard light without modifiers

Final image.

Now that the light is balanced and the subject’s general direction has been determined, the shooting can commence. Note that my final composition is a wider one, allowing the flowers and more of the park to show in the shot. This wider composition helps take the focus off any remaining hard shadows, such as the one below her jaw. Check out a few examples where I used this technique in other shoots.

lighting softening hard light without modifiers nick fancher photography commercial portrait

Unlit, midday sun.

lighting softening hard light without modifiers nick fancher photography commercial portrait

One, barebulb speedlite at full power. Note that I was shooting at 2.8, using a variable ND filter to lower the ambient light.

lighting softening hard light without modifiers nick fancher photography commercial portrait

unlit

lighting softening hard light without modifiers nick fancher photography commercial portrait

One, barebulb speedlite at full power. Note that I was shooting at f/4, using a variable ND filter to lower the ambient light.

About the Author:
Nick Fancher is a Columbus, Ohio—based portrait and commerce photographer. Author of Run and Gun Lighting Resource, he graduated from The Ohio State University with a BFA in fine art photography in 2005.

Go to full article: Soften Your Light Without Using Modifiers

What are your thoughts on this article? Join the discussion on Facebook

Article from: PictureCorrect

The post Soften Your Light Without Using Modifiers appeared first on PictureCorrect.

PictureCorrect

This entry was posted in Photo Techniques and tagged , , , , . Bookmark the permalink.

Leave a Reply